The response code will be the <response> element in the returned XML from Base HostBridge or the .response property when using the HB.js Session object (described here).

 

Response Code Response MessageAction to Be  Taken
0Ok.  Transaction Completed SuccessfullyNone
32Unable to start target transaction.  Verify that the target transaction is correct and properly defined to CICS, installed, and enabled.  If it is, contact HostBridge Support
36Internal error.  GETMAIN failed.  Unable to acquire needed memory to execute.Ensure that your storage definitions (EDSALIM, for example) in the SIT are adequate for the region HostBridge is running in.  If the problem persists, save the output for the CICS started task and contact HostBridge Support.
40Timeout waiting for output message from application.Ensure that the application being executed is not looping or in runaway task state.  If it is not, try increasing the HB_FACILITY_TIMEOUT value to see if the problem is resolved.  If the problem persists, save the output for the CICS started task and contact HostBridge Support.
100WRITEQ failed.  Verify that there is adequate temporary storage allocated for the region that HostBridge is running in.  If the problem persists, save the output for the CICS started task and contact HostBridge Support.
110READQ failed.  Expected HostBridge TS queue was not found.Save the output for the CICS started task and contact HostBridge Support.
10000User does not have adequate security to execute target transaction.Review your mainframe security definitions for the user that is attempting the transaction execution.
11000Internal error.  CICS WEB RECEIVE failed.Save the output for the CICS started task and contact HostBridge Support.
11001HBRQSTAT TS queue was not found.Verify adequate temporary storage allocation and that this and all HB* TS queues are not being deleted by a 3rd party utility or monitoring tool.  If the problem persists,  save the output for the CICS started task and HostBridge Support.
12000Facility like specified ( HB_FACILITY_LIKE= ) is not a valid terminal definition name.Review your RDO TERMINAL definition for the facility defined in the HB_FACILITY_LIKE directive.
14001HostBridge could not LOAD the BMS mapset used by the target application.

HostBridge requires access to the BMS mapsets for proper operation.  Review your DFHRPL concatenation and your RDO LIBRARY definitions to ensure that you have access to the load library that contains the mapset.  If you do, contact HostBridge Support.

14002User does not have permission to load the BMS mapsets used by the target transaction.Review your mainframe security definitions for the user that is attempting the BMS mapset load.
14003The BMS map used by the target transaction was not found in the BMS mapset.  This usually indicates that the mapsets that HostBridge are loading are not the same as the mapsets that the transaction uses at runtime (an application versioning issue).  Review your DFHRPL concatenation and your RDO LIBRARY definitions to ensure that the correct version of the mapset is being accessed.  If the problem persists, contact HostBridge Support.
14004BMS maps do not contain an ADSD.  The maps need to be recompiled with CICS TS 1.3 or later BMS macros.   If you are unable to do this (either because of security restrictions or because you don not have the BMS map source code), contact HostBridge Support.
14006Specified transaction rename exit ( HB_TRANID_EXIT= ) could not be executed.Ensure that the program specified in the HB_TRANID_EXIT directive exists in a load library that is part of the DFHRPL or LIBRARY concatenation, and is either defined to the CICS region via RDO or autoinstalled.  If the problem persists, contact HostBridge Support.
14007Transaction rename exit ( HB_TRANID_EXIT= ) indicated to not run the specified transaction. Transaction was not executed.Review the rename exit program to see why it prevented the execution of the transaction.  If the problem persists, contact HostBridge Support.
14008Specified routing exit ( HB_ROUTING_EXIT= ) could not be executed.Ensure that the program specified in the HB_ROUTING_EXIT directive exists in a load library that is part of the DFHRPL or LIBRARY concatenation, and is either defined to the CICS region via RDO or autoinstalled. If the problem persists, contact HostBridge Support.
14009Remote loading of BMS mapset failed ( HB_REMOTE_MAP=).Ensure that the BMS mapset specified in the HB_REMOTE_MAP directive is properly defined in RDO as a remote mapset. If the problem persists, contact HostBridge Support.
14010Specified target transaction is disabled and cannot be executed.Ensure that the transaction is enabled.
14011CICS Dynamic transaction routing exit specified to not execute target transaction.Review the routing exit program to see why it prevented the execution of the transaction. If the problem persists, contact HostBridge Support.
14500HostBridge Keep Alive transaction to refresh bridge facility timeout could not be executed.Save the output for the CICS started task and contact HostBridge Support.
15000Specified token value ( HB_TOKEN= ) does not exist.Review your application to ensure that the token that you are passing is for the correct session. If the problem persists, contact HostBridge Support.
15001Specified token does not consist of valid characters.  Tokens consist of hexadecimal digits ( 0-9, A-F ). Correct the HB_TOKEN directive  to specify a valid token value.
15002Internal error.  Token is zero when it should have a value.Save the output for the CICS started task and contact HostBridge Support.
15003Internal error.  Token creation failed.Save the output for the CICS started task and contact HostBridge Support.
15004Internal error.  Generated token value was zero.Save the output for the CICS started task and contact HostBridge Support.
15005Token is currently in use.  Ensure that only a single client is using the token at a given time. If the problem persists, contact HostBridge Support.
15006Token cannot be used.  It has been previously deleted or timed out.Review your application to ensure that the token that you are passing is for the correct session. If the problem persists, contact HostBridge Support.
15007Current USERID does not match the USERID that created the token initially.Tokens are not allowed to be shared across users; the user that created it is the only user allowed to continue using the token.  Review your application to ensure that the token that you are passing is for the correct session. If the problem persists, contact HostBridge Support.
15100Internal error.  State block invalid or corrupted.Save the output for the CICS started task and contact HostBridge Support.
15200Delete session cannot be honored as the transaction is conversational and currently running.Remove the HB_DELETE_SESSION directive from your command string.
16000Specified COMMAREA program ( HB_PROGRAM= ) could not be executed.Ensure that the program specified in the HB_PROGRAM directive exists in a load library that is part of the DFHRPL or LIBRARY concatenation, and is either defined to the CICS region via RDO or autoinstalled. If the problem persists, contact HostBridge Support.
16001Link failed to the COMMAREA exit program.Ensure that the program specified in the HB_PROGRAM directive exists in a load library that is part of the DFHRPL or LIBRARY concatenation, and is either defined to the CICS region via RDO or autoinstalled. If the problem persists, contact HostBridge Support.
16002Group specified by the HB_START_GROUP directive not found.Review the contents of the copy book used to generate the data-only CSECT that HostBridge uses (via specification in the HB_CAMAP directive) to ensure that the group specified exists within it as a COBOL field name.  If the problem persists, contact HostBridge Support.
16003Visual COMMAREA proxy transaction failed.Save the output for the CICS started task and contact HostBridge Support.
17000Specified FEPI pool not found.Ensure that the appropriate POOL definition exists.  If the problem persists, contact HostBridge Support
17001FEPI CONVERSE failed.Contact HostBridge Support.
17002Specified FEPI connection not found.Ensure that the appropriate CONNECTION definition exists. If the problem persists, contact HostBridge Support.
17003Specified FEPI target not found.Ensure that the appropriate TARGET definition exists. If the problem persists, contact HostBridge Support.
17004FEPI target required to execute.Contact HostBridge Support.
17005No FEPI sessions are available.Contact HostBridge Support.
17006FEPI allocate timed out waiting for the resource to become available.Contact HostBridge Support.
17007Internal error.  Unexpected FEPI error.Contact HostBridge Support.
17008Requested FEPI pool resource exists, but is out of service.Place the POOL back in service.
17009Requested FEPI target resource exists, but is out of service.Place the TARGET back in service.
17010Internal error.  FEPI RECEIVE failed.Contact HostBridge Support.
17011FEPI ALLOCATE POOL received wrong node.Contact HostBridge Support.
17012FEPI ALLOCATE received wrong status for MODE 1.Contact HostBridge Support.
17013FEPI ALLOCATE received wrong status for MODE 2.Contact HostBridge Support.
17014Internal error.  FEPI SEND failed.Contact HostBridge Support.
18000Specified target transaction abended while executing.  If abend code is empty, this usually indicates a security issue where the security manager abended the task before CICS could fill out the control block with abend information.Review your application to determine the cause of the abend.  If the problem persists, save the output for the CICS started task and contact HostBridge Support.
18001Specified target COMMAREA program abended while executing.  If abend code is empty, this usually indicates a security issue where the security manager abended the task before CICS could fill out the control block with abend information.Review your application to determine the cause of the abend. If the problem persists, save the output for the CICS started task and contact HostBridge Support.
19000Internal error.  PAGING support received a page that was out of bounds.Contact HostBridge Support.
19001Internal error.  Unable to retrieve PAGING vector.Contact HostBridge Support.
20000License key has expired.Contact HostBridge Sales.
20001License key is not valid.Contact HostBridge Support.
20002License key not found.Contact HostBridge Support.
20003Internal error.  License subsystem failure.Contact HostBridge Support.
20004HostBridge Base product is not licensed, request cannot be honored.Contact HostBridge Sales.
20005HostBridge EMRO context shipping is not licensed, request cannot be honored.  If you do not have a license for HostBridge EMRO context shipping, remove all usages of HB_CONTEXT_TRAN from your applications.  If you do have a license for HostBridge EMRO context shipping or wish to purchase it, contact HostBridge Sales.
20006HostBridge EMRO routing is not licensed, request cannot be honored.If you do not have a license for HostBridge EMRO routing, remove all usages of HB_CONTEXT_EXIT from your applications. If you do have a license for HostBridge EMRO routing or wish to purchase it, contact  HostBridge Sales.
21000Session limit has been reached.  No new session can be created until existing ones are deleted or timed out.This error usually occurs if you have specified the HB_SESSION_LIMIT directive as one of your HostBridge initialization directives.  Use the HBSM transaction to view the most recent set of initialization (INIT) directives. Then, review the directives in the HBR@INIT PARMLIB member (or load module if you are not using the HostBridge PARMLIB) and increase the value for HB_SESSION_LIMIT accordingly.  If the problem persists or you are not using the HB_SESSION_LIMIT directive, contact HostBridge Support.
22000Field rename version mismatch.  For CA-Ideal applications, this means that the panel that was processed for HostBridge is a different version than what the CA-Ideal application reported currently using.
30000Internal error.  Unexpected CICS failure.Save the output for the CICS started task and contact HostBridge Support.
40000Inbound XML document parsing failed.This error is normally caused by sending an inbound XML document to HostBridge that is not well formed.  Review the contents of the inbound XML document to ensure that it is in the correct format.  If the problem persists, save a sample of the inbound XML and contact HostBridge Support.   
40001Inbound XML document does not contain a <hostbridge> root node.Review the contents of the inbound XML document to ensure that it is in the correct format. If the problem persists, save a sample of the inbound XML and contact HostBridge Support.  
40002Inbound XML document does not contain a <transaction> node.Review the contents of the inbound XML document to ensure that it is in the correct format. If the problem persists, save a sample of the inbound XML and contact HostBridge Support.  
40003Inbound XML document does not contain a <parameters> node.Review the contents of the inbound XML document to ensure that it is in the correct format. If the problem persists, save a sample of the inbound XML and contact HostBridge Support.  
40004Inbound XML document <parameters> node was empty.Review the contents of the inbound XML document to ensure that it is in the correct format. If the problem persists, save a sample of the inbound XML and contact HostBridge Support.  
50001Unable to load the specified input COMMAREA layout map.Ensure that the data-only CSECT specified in the HB_CAMAP or HB_CAMAP_IN directive exists in a load library that is part of the DFHRPL or LIBRARY concatenation, and is either defined to the CICS region via RDO or autoinstalled. If the problem persists, contact HostBridge Support.
50002Unable to load the specified output COMMAREA layout map.Ensure that the data-only CSECT specified in the HB_CAMAP or HB_CAMAP_OUT directive exists in a load library that is part of the DFHRPL or LIBRARY concatenation, and is either defined to the CICS region via RDO or autoinstalled. If the problem persists, contact HostBridge Support.
60000VSE only.  Output document exceeded 32k limit.Reduce the size of the outbound XML by modifying the copybook that is input to the batch HBR$CAMP process, and rerunning the process to create a new verion of the CAMAP data-only CSECT for the COMMAREA request. If the problem persists, contact HostBridge Support.
70000DFHL3270 LINK failed.  Make sure CICS program DFHL3270 is defined/installed and available.  If it is, save the output for the CICS started task and contact HostBridge Support.
70001DFHBRNSF file is not found.  Make sure CICS file DFHBRNSF has been created and is defined/installed and available. (This procedure is outlined in the IBM External Interfaces Guide.) If it is, save the output for the CICS started task and contact HostBridge Support.
70002CICS was unable to create a new bridge facility.Save the output for the CICS started task and contact HostBridge Support.
70003Internal error. Unable to run the specified transaction via DFHL3270.Save the output for the CICS started task and contact HostBridge Support.
70004Specified context transaction failed to execute.Save the output for the CICS started task and contact HostBridge Support.
80000Web service definition not found.Save the output for the CICS started task and contact HostBridge Support.

© 2022 HostBridge Technology, LLC
Unless otherwise noted, all rights reserved.